Best Paint Booth Manufacturers in UAE

A complete solution provider within the field of surface preparation & paint spray booth provides its expertise for each industry. MGI design, manufactured, installed, erected & commissioned huge turnkey projects for various renowned giant industries. If you’re trying to find the best Paint booth manufacturers in UAE then MGI can design and deliver paint booth across any city in UAE. Paint Booth Suppliers in UAE

Manufacturers of Paint Booth in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm al Quwain and Blast Room systems in UAE

The various sorts of paint booth manufactured in UAE by MGI are:

• Down Draft Paint Spray Booth
• Semi-Down Draft Paint Spray Booth
• End Draft Paint Spray Booth
• Down Draft Wet Paint Spray Booth
• Water Curtain Paint Spray Booth

Features of our Paint Booth Manufacturing in UAE

• Healthy and Pollution free work environment
• All Modular Construction
• High Particulate removal efficiency
• No Sludge Disposal
• Access door window with clear toughened glass
• Special design of intake & exhaust filtration provides for even air movement inside the booth
• The efficient centrifugal fan guarantees superior air movement & quite operation

Benefits of a Paint Booth for your organisation

• ENHANCE QUALITY of labor – Remove over spray effectively, thus eliminate its setting on wet painted components
• OPERATOR COMFORT AND HEALTH – Provides clean air to the operator, removing optimized paint particles through the exhaust
  SAFETY – Spraying paint may involve fire risk from both solvent vapours and continuously over spray deposits. A risk eliminated by employing a spray booth.
• LAW – In compliance with stringent pollution control norms
• Increase Productivity – Decrease operating expense thanks to elimination of water curtain chemical

Draft Down Paint Booth

The Vertical Down Draft (the direction of flow of air is towards the ground of spray booth) Paint Spray Booth is suitable for conventional, airless and electrostatic painting and its consists of painting chamber, Inlet air cleaner , Paint Trap Filters, axial flow Fan, motor , duct and canopy etc. the planning of the paint booth are going to be of vertical down draft type paint booth with disposable paint trap filters on floor. The intake air into the paint booth is filtered by intake filter to avoid foreign particle deposition on the painted surface. The intake air is sucked into the space by the extraction modules located on the ground .

Enclosure:

Paint Spray booth is of rectangular shape rigid bolted construction. The structure is self supporting and won’t need supporting foundation except fixing bolts. Fabricated out of 18swg M.S Sheet panels bolted with steel for rigidity.

Functions:

• Reduces the hearth hazard
• Maintain dust level to minimum, prevents spreading of paint and maintain clean air at the operators breathing level.
• Collects over sprayed paint, solid and discharge fumes outside the building

Semi-Down Draft Paint Booth

The Semi Down Draft (the direction of flow of air is towards the side walls of spray booth) Paint Spray Booth is suitable for conventional, air-less and electrostatic painting and its consists of painting chamber, Inlet air cleaner , Paint Trap Filters, axial flow Fan, motor , duct and canopy etc.

• Collects over sprayed paint, solid and discharge fumes outside the building
• Maintain dust level to minimum, prevents spreading of paint and maintain clean air at the operators breathing level.
• Reduces the hearth hazard

End Draft Paint Booth Manufacturers in UAE

The End Draft (the direction of flow of air is towards the ground of spray booth) Paint Spray Booth is suitable for conventional, air-less and electrostatic painting and its consists of painting chamber, Inlet air cleaner , Paint Trap Filters, axial flow Fan, motor , duct and canopy etc. the planning of the paint booth are going to be of End Draft type paint booth with disposable paint trap filters on floor. The intake air into the paint booth is filtered by intake filter to avoid foreign particle deposition on the painted surface. The intake air is sucked into the space by the extraction modules located on the rear wall.

Functions: 

• Maintain dust level to minimum, prevents spreading of paint and maintain clean air at the operators breathing level.
• Collects over sprayed paint, solid and discharge fumes outside the building
• Reduces the hearth hazard

Water Curtain Type Paint Booth

The painting is administered by operator with the assistance of painting gun [Buyer to rearrange painting gun]. The paint fume particles are sucked by the partial vacuum created by fan through a water curtain. The air is cleaned by scrubbing action in turbulent water. The particulate remains floating on cistern is periodically removed manually. The air discharged into the atmosphere is clean keeps the environment clean and friendly.

Enclosure:

Spray booth is of rectangular shape rigid bolted construction. The structure is self-supporting and can not need supporting foundation except fixing bolts. Fabricated out of 18swg M.S Sheet panels bolted with steel for rigidity.

Construction & Design

The practical expertise enables us to style the Water Curtain Spray Booth with superior performance. The spray booth is modular in construction in order that booth are often easily installed, modified or integrated into complete plant. the extra middle suction, clearly provides improved air guidance and suction of hazardous paint fume particles. The water film thickness on the drain wall are often adjusted individually via throttle valves. The unit meets OSHA’s safety requirements.

Essential Elements of Water Curtain Spray Booth

Exhaust Fan Motor – Paint Spray Booth is mounted with high efficiency centrifugal fan and motor to suck the fume and particulate in air
Water Pump and Piping – Paint Spray Booth given pump and suitable piping arrangement for correct circulation of water
Throttle Valve – to regulate water film thickness on the drain wall

Down Draft-Wet Type Paint Spray Booth

The painting is administered by operator with the assistance of spray-painting gun [Buyer to rearrange painting gun]. The paint fume particles are sucked by the partial vacuum created by fan through a tank of water. The particulate floating on cistern is periodically removed manually. The air discharged into the atmosphere is clean keeps the environment clean and friendly.

Pumpless type Wet Fume Collector

Wet fume collector is fabricated from 2mm steel sheet and suitably reinforced for strength and rigidity. Grating are going to be provided on cistern in paint spray booth. cistern is civil constructed as per pit drg. provided by us. Detailed civil drg. for pit construction is in buyer’s scope.

Baffle type arrangement to eliminate the moisture from air exit call at atmosphere. During operation, a series of eliminator separate the air from the liquid moisture. Clean air is exhausted to atmosphere. Side doors of size 500 mm (W) x 100 mm (H) is provided at the edges of wet fume collector for inspection and maintenance. Disposal of paint particulate from the cistern is manual.

The unique features of Pumpless Water Wash Booth

During Thermal Spray process dust is generated to stay the environment friendly suction is made by an exhaust. Fan causes the dust laden air to enter a winder area after an abrupt change in its direction. At this stage heavier dust particles calm down without causing any abrasion to the metallic surfaces, which may be removed through a clean out door.

After this the air carrying finer dust particles strikes the water surface and travels beneath plate of a venture system creating a stream of droplets entraining dust. This stream undergoes a change in direction causing dust to urge collected within the water.

Dust free but wet air strikes variety of baffles where the moisture is separated and clean air escapes to the atmosphere through the fan . The collected dust settles down as sludge at rock bottom of the wet collector and is cleaned out manually at intervals through a drain.

PU Coated Paint Spray Booth Manufacturers in UAE

Powder laden air from dust zones is sucked into the pre filter (multi cyclones) thanks to exhaust created by the fan . Maximum particles are collected by the pre filter, while little or no powder is collected around
the fabric bags. the heart beat jet filter bag dust collector may be a self-cleaning system.

The background level is below 85 dBA. Dust emission level within the atmosphere through the material bags is a smaller amount than 50 mg / N cubic meters. The suspended powder is merely collected within the dust collector. Powder that falls down in the hopper is collected manually from the hopper. Fan motors: 7.5 HP, 415V / 3P / 50 Hz IP 54 protection.

Powder Coating Booth Manufacturers in UAE

“MGI” brings you the manual and automatic powder coating booths with fast and quality coating solution. Booths are designed to offer high degree of efficiency in recovery and optimum performance of the spray guns, which ends up you in low running cost and more profits. we offer the entire turnkey solution with Conveyorized Automatic Blasting or Pre treatment, Preparation room, Automatic Powder coating booth with proper feed reciprocator’s gun and efficient recovery of powder, new technology Infrared catalytic heaters oven for fast curing.

We bring you the Puff Sandwiched panel Booths with sandwiched panel oven also to supply an aesthetic looks. Which offer you the extra advantage of Puff Panels like high insulation value, anti corrosive, also resistance of warmth upto 70 degrees, resistance to detergents, liquids and chemical solvent as compare to normal GI or MS sheet. Also we bring you the fast color change booths for various color applications.

MGI POWDER COATING BOOTH ADVANTAGES

• With New Aesthetic look thanks to Puff sandwiched panel designed
  with additional advantages of high insulation value, anti corrosive,
  also resistance of warmth upto 70 degrees, resistance to detergents,
  liquids and chemical solvent.
• High Efficiency, Quality, Cost Optimization, High Productivity are
  the features of our booths. Easy for maintenance purpose and also designed for straightforward fitment & are of strong designed.

Working video of our Automobile Paint Booth

https://youtu.be/h5N3_G4oUy0

PAINT SPRAY BOOTH – FOR AUTOMOBILE Manufactures in UAE

• The health and explosion hazardous paint fume particles are sucked by partial vacuum create by centrifugal fan through filters.
• Fully Enclosed Down Draft Dry Type Paint Spray
• Booth is meant to supply efficient, flexible and clean painting .

Salient Features:

• Reduces the hearth hazard
• Collects over sprayed paint, solid and discharge solvent fumes outside the building.
• Maintains dust level to minimum, prevents spreading of paint and maintains clean air at the operators breathing level.
• Special design of intake & exhaust filtration provides for even air movement inside the booth.
• The efficient centrifugal fan guarantees superior air movement & quite operation.
• Access door window is with clear toughened glass.
• Healthy and pollution free work environment.
• High particulate removal efficiency.
• All modular construction.
• No sludge disposal.

Specifications: 

Paint Hood: Paint hood enclosure is fabricated from MS steel sheet and suitably reinforced for strength and rigidity. The paint booth is open from front and bottom side.

llumination
Paint booth is provided with Four No. Tube Lamps for illumination

Exhaust Fan Motor
Wet fume collector is mounted with exhaust fan motor to suck the fume and clean air is discharged into the atmosphere.

Control Panel
Suitable control panel housed with DOL Starter for fan motor, pump motor and On/Off switch for illumination.

Paint Trap Filter
Material:
Glass Fiber-Progressive
Structured
Filter Class: EU4
Dust Holding: ~1000
g/sqm (In dry condition)

Spraying Guns

Ceiling diffusion air intake filter

VISION GLASS

Illumination

Request a Quote Today for a Complete Blasting and Painting Solutions – Paint Booth Manufacturers in UAE

Ph: +91-8882490101  

Email :  uae@maanglobalindustries.com

Our  Range of Products includes:

Sand Blasting Machine 

Cabinet Type Shot blasting Machine

Shot blasting abrasives